由 ep | 9 月 15, 2026 | Maintenance
MAINTENANCE An increase in measured lost motion can come from the gearbox, coupling, pinion, rack, bearings or machine structure. Quick answer Backlash Growth: Inspection Methods and Likely Causes should be evaluated from the real load and motion conditions, not from...
由 ep | 9 月 15, 2026 | Maintenance
MAINTENANCE Temperature is meaningful only when measured at a defined location under a defined load and duty cycle. Quick answer Gearbox Temperature: What to Measure Before Calling It Overheating should be evaluated from the real load and motion conditions, not from a...
由 ep | 9 月 15, 2026 | Maintenance
MAINTENANCE Lubrication and sealing condition influence wear, temperature and contamination control inside a gearbox. Quick answer Lubrication and Seal Checks for Precision Planetary Gearboxes should be evaluated from the real load and motion conditions, not from a...
由 ep | 9 月 15, 2026 | Installation
INSTALLATION Commissioning should separate mechanical verification from servo tuning so an installation problem is not hidden by aggressive control settings. Quick answer Commissioning a New Planetary Gearbox on a Servo Axis should be evaluated from the real load and...
由 ep | 9 月 15, 2026 | Installation
INSTALLATION A planetary reducer needs a flat, rigid mounting face and a fastening method that preserves alignment under torque reaction. Quick answer Mounting Orientation, Fasteners and Flange Seating for Servo Gearboxes should be evaluated from the real load and...
