by ep | Sep 15, 2026 | Maintenance
MAINTENANCE An increase in measured lost motion can come from the gearbox, coupling, pinion, rack, bearings or machine structure. Quick answer Backlash Growth: Inspection Methods and Likely Causes should be evaluated from the real load and motion conditions, not from...
by ep | Sep 15, 2026 | Maintenance
MAINTENANCE Temperature is meaningful only when measured at a defined location under a defined load and duty cycle. Quick answer Gearbox Temperature: What to Measure Before Calling It Overheating should be evaluated from the real load and motion conditions, not from a...
by ep | Sep 15, 2026 | Maintenance
MAINTENANCE Lubrication and sealing condition influence wear, temperature and contamination control inside a gearbox. Quick answer Lubrication and Seal Checks for Precision Planetary Gearboxes should be evaluated from the real load and motion conditions, not from a...
by ep | Sep 15, 2026 | Installation
INSTALLATION Commissioning should separate mechanical verification from servo tuning so an installation problem is not hidden by aggressive control settings. Quick answer Commissioning a New Planetary Gearbox on a Servo Axis should be evaluated from the real load and...
by ep | Sep 15, 2026 | Installation
INSTALLATION A planetary reducer needs a flat, rigid mounting face and a fastening method that preserves alignment under torque reaction. Quick answer Mounting Orientation, Fasteners and Flange Seating for Servo Gearboxes should be evaluated from the real load and...
by ep | Sep 15, 2026 | Installation
INSTALLATION The output connection must transmit torque without creating unnecessary bending or axial load at the reducer. Quick answer Output Coupling and Pulley Installation on Precision Gearboxes should be evaluated from the real load and motion conditions, not...
by ep | Sep 15, 2026 | Installation
INSTALLATION The motor shaft and gearbox input must meet concentrically without side load or axial forcing. Quick answer Aligning Motor Shaft and Gearbox Input Without Preload should be evaluated from the real load and motion conditions, not from a single catalogue...
by ep | Sep 15, 2026 | Installation
INSTALLATION A correct motor-to-gearbox fit protects the input bearing, clamping connection and alignment from installation-induced load. Quick answer Servo Motor to Planetary Gearbox Installation Checklist should be evaluated from the real load and motion conditions,...
by ep | Sep 15, 2026 | Application
APPLICATION Vehicle drive and steering modules combine packaging constraints with repeated start-stop duty and wheel loads. Quick answer Planetary Gearboxes for AGV and Mobile Automation should be evaluated from the real load and motion conditions, not from a single...
by ep | Sep 15, 2026 | Application
APPLICATION Rotary indexing demands repeatable acceleration, settling and position hold over many cycles. Quick answer Planetary Gearboxes for Rotary Indexing Applications should be evaluated from the real load and motion conditions, not from a single catalogue...
